Basic Info.
Model NO.
All type models Available
Outsite Diameter
6.5mm-100mm
Specification
ISO9001; CE
Product Description
Automobile clutch bearings belong to one of the important components, with the development of the automobile industry, it appears a lot of structure type. Low-speed unit clutch bearings never aligning performance, rotating outer ring, cast iron sleeve or inner ring and sleeve together as one, to the development with self-aligning performance, inner ring rotation, punching and stamping sleeve or ferrule plastic sleeve of high speed, high reliability bearing unit, weight, cost reductions realized components, lightweight, high reliability and long life.
Clutch bearings installed between the clutch and the gearbox, separate loose sleeve bearing on the transmission of the first axis of the tubular extension of the bearing cap, by the return spring to release bearing shoulder always against the release fork, and retreat to the last position to keep up with separation lever end (separation means) about 3 ~ 4mm gap.
The clutch pressure plate, release lever and the engine crankshaft synchronous operation, and the separation clutch fork can move axially along the output shaft, with the release fork to dial direct release lever is clearly not enough, by separating bearings can make separation lever while rotating an edge axial movement of the output shaft of the clutch, the clutch can be engaged to ensure smooth, gentle separation, to reduce wear and extend clutch life and the entire drivetrain.
SKF-Models |
VKC2045 | VKC3560 | VKC3649 |
VKC2080 | VKC3564 | VKC3651 |
VKC2091 | VKC3565 | VKC3652 |
VKC2095 | VKC3567 | VKC3654 |
VKC2113 | VKC3568 | VKC3659 |
VKC2115 | VKC3574 | VKC3666 |
VKC2120 | VKC3575 | VKC3667 |
VKC2121 | VKC3577 | VKC3668/FS |
VKC2144 | VKC3578 | VKC3669 |
VKC2161 | VKC3579 | VKC3671 |
VKC2168 | VKC3580 | VKC3673 |
VKC2168 | VKC3581 | VKC3674 |
VKC2169 | VKC3582 | VKC3675 |
VKC2170 | VKC3583 | VKC3678 |
VKC2183 | VKC3584 | VKC3678 |
VKC2184 | VKC3587 | VKC3680 |
VKC2189 | VKC3588 | VKC3684 |
VKC2191 | VKC3598 | VKC3688 |
VKC2215 | VKC3600 | VKC3688A |
VKC2216 | VKC3601 | VKC3701 |
VKC2220 | VKC3602 | VKC3728 |
VKC2238 | VKC3603 | VKC3753 |
VKC2241 | VKC3605 | VKC4636 |
VKC2433 | VKC3606 | VKC4709 |
VKC2516 | VKC3609 | VKC4711 |
VKC2518 | VKC3611 | VKC5005 |
VKC2518 | VKC3613 | VKC5091 |
VKC2520 | VKC3615 | VKC5168 |
VKC2523 | VKC3615 | |
VKC2533 | VKC3616 | |
VKC2536 | VKC3617 | |
VKC2542 | VKC3619 | |
VKC2548 | VKC3620 | |
VKC2550 | VKC3621 | |
VKC2551 | VKC3623 | |
VKC2601 | VKC3625 | |
VKC2602 | VKC3626 | |
VKC3507 | VKC3627 | |
VKC3508 | VKC3627 | |
VKC3510 | VKC3628 | |
VKC3515 | VKC3629 | |
VKC3516 | VKC3640 | |
VKC3539 | VKC3641 | |
VKC3542 | VKC3643 | |
VKC3551 | VKC3644 | |
VKC3556 | VKC3645 | |
VKC3558 | VKC3646 | |
VKC3559 | VKC3647 | |
NSK-Models |
27TKD07 | 60TKZ3201R |
38TKA2801 | 60TKZ3503R |
38TKA2801U3 | 62TKA3301 |
44TKA2803 | 62TKA3301A |
44TKB2805 | 62TKA3304 |
44TKB2805BR | 62TKA3309U3 |
44TKB2805R | 62TKA3310 |
44TKB2806A | 62TKA3310 |
44TKB2806A | 62TKA3311 |
44TKZ2801AR | 62TKA3314 |
47TKA2901 | 62TKB3303 |
47TKB2901 | 62TKC4001 |
47TKB3001 | 68TKB3201C |
47TKB3101 | 68TKB3506AR |
47TKB3102 | 68TKB3802AR |
47TKB3102A | 68TKB3803AR |
48TKA3201U3 | 78TKL4001AR |
50TKA3305RU3 | CF-H06 |
50TKA3805 | |
50TKB3301BR | FE84-16-510 |
50TKB3304 | FR2119A |
50TKB3504BR | JAPANPARTS |
50TKB3505BR | RDL1365 |
50TKB3508R | RDL1379 |
50TKE3301 | TK27B07 |
50TKZ23001DR | TK52Z-1C |
50TKZ3301DR | TK52Z-1CU3 |
52TKD01 | TKS54-60-10/2E |
54TKA3501 | Valeo |
54TKB3604 | WANLI |
54TKE3601 | |
54TKE3602 | |
54TKE3602A | |
54TKE3604 | |
54TKZ3501AR | |
55TKA3102 | |
55TKA3102A | |
55TKB3502 | |
58TKA3702U3 | |
58TKA3703 | |
58TKA3703B | |
58TKB3505RA | |
58TKZ3703R | |
60TKA3502U3 | |
60TKB3500 | |
60TKB3502R | |
60TKB3506BR | |
60TKC4202 | |
NTN-Models |
52TMK804/2E | FCR54-47-2/2E |
FCR38-1 | FCR54-48-3/2E |
FCR38-1/2E | FCR54-5/2E |
FCR44-14-5/5K | FCR54-58/2E |
FCR44-2 | FCR54-60-10/2E |
FCR44-25-4/2E | FCR54-60-13/2E |
FCR44-29-14/2E | FCR55-10/2E |
FCR44-29-15/5K | FCR55-15/2E |
FCR44-29-3/2E | FCR55-17/2E |
FCR44-29-5/5K | FCR55-17-11/2E |
FCR44-32-2/2E | FCR55-17-9/2E |
FCR44-36-1/2E | FCR55-5 |
FCR44-9/2E | FCR55-6 |
FCR44-9/5K | FCR55-6/2E |
FCR47-5/2E | FCR62-11/2E |
FCR47-8-3/2E | FCR62-13/2E |
FCR47-8-4/2E | FCR62-16-8 |
FCR48-11/2E | FCR62-16-8/2E |
FCR48-11-3/2E | FCR62-23/2E |
FCR48-22/2E | FCR62-27/2E |
FCR48-23/2E | FCR62-28-4/2E |
FCR48-24/2E | FCR62-30/2E |
FCR48-24-5/2E | FCR62-30-4/2E |
FCR48-39-4/2E | FCR62-32/2E |
FCR48-39-6/2E | FCR62-32-1/2E |
FCR50-10/2E | FCR62-32-10/2E |
FCR50-20 | FCR62-32-11/2E |
FCR50-20/5K | FCR62-32-12/2E |
FCR50-21/5K | FCR62-32-14/2E |
FCR50-30-10/5K | FCR62-33-4/2E |
FCR50-30-10/5K | FCR62-42-4/2E |
FCR50-30-13/5K | FCR62-5/2E |
FCR50-30-14 | FCR62-5/2E |
FCR50-30-14/2E | RCT285SA |
FCR50-30-2/5K | RIB001 |
FCR50-30-3/5K | X10-FCR55-5/2E |
FCR50-35/5K | |
FCR50-35-6/2E | |
FCR50-41-2/2E | |
FCR50-41-3 | |
FCR50-41-3/2E | |
FCR54-13/2E | |
FCR54-13/2E | |
FCR54-17/2E | |
FCR54-19 | |
FCR54-19/2E | |
FCR54-33-1/2E | |
FCR54-46-2/2E | |
Caution
1) In accordance with operational requirements, to avoid half-engaged clutch semi-isolated state, reduce the frequency of use of the clutch.
2) pay attention to maintenance, periodic or annual maintenance in vetting by cooking method make butter soaked it with ample lubricant.
3) Note leveling clutch lever return spring force to ensure compliance.
4) Adjust the free travel, it meets the requirements (30-40mm), to prevent the free travel is too large or too small.
5) to minimize the engagement separation times, reduce the impact load.
6) light step, easy to smooth engagement and separation.
Packaging:
1) Industrial packaging: a) plastic bag +carton +pallet or a) plastic bag + kraft paper +carton +pallet
2) Commercial packaging: plastic bag+ color paper+ carton+ pallet
3) According to the requirement of customers
Shipping:
1) Less than 45 KGS, send by express. ( Door to Door, Convenient )
2) Between 45 - 200 KGS, send by air transport. ( Fastest and safest, but expensive )
3) More than 200 KGS, send by sea. ( Cheapest, but long time )
4) According to the customer request
Payment:
1) TT, 30% deposit , 70% before shippment.
2) L/C at sight. (high bank charge, not suggest , but acceptable )
3) 100% Western Union or Paypal in advance. (specially for air shipment or small amount)
Why Choose Us?
1. Experience: we have more than 20 years' experience in manufacturing bearings. The complete industry chain: continuous material suppliers,
strong supply capacity, perfect system of freight forwarding are served to you.
2. Professional: almost types of ball bearings and roller bearings can be offered. Diameter 10-60mm, the length can be produced according to your requirement. Besides, OEM service is available.
3. Quality: we have our own factory, professional design team, strict quality control system and strong transportation cooperation. SGS and ISO certificates are successfully passed.
4. First-class Service: we ensure the well processing of the practice of our products for customers.
5. Carton Fair: We have booths at Canton Fair and East-China Fair, and also some international fair
abroad. You will get what you want at our booth.
Please feel free to contact with us at any time!
Our Promises:
Product quality standards are guaranteed. Our products have got ISO 9001 & CE international quality management system. They all produced with best advanced technology.We are proactive and we offer only products complying with top standards of quality and warranty.
Service Quality:
We are a highly qualified team: our employees have wide experience in this business and therefore understand our clients' real needs, being able to generate solutions to fully satisfy them. We believe that customer service is our key work, and consistently try to exceed clients' expectations.
Any questions, please feel free to contact us.
Address:
China ( Skype: Live: Sjzcbearing ), Shanghai, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Textile
Management System Certification:
ISO 9001
Company Introduction:
Shanghai Shengjian Bearing Co., Ltd is the new sub-branch of Shandong Shengjian Bearing Co., Ltd, which is specilized in bearing design, R&D, manufacturing and sales for 15 years.
We are committed to manufacturing and providing bearings of high quality, high stability and long life span with advanced technology and strict qualtiy control system like heat treatment, grinding, assembly, testing to meet customers requirements.
Our production line: Deep groove ball bearings, Spherical ball bearing, Thin section bearing, Thrust ball bearing, Thrust roller bearing, Cylindrical roller bearing, Tapered roller bearing, Needle roller bearing, Rod end bearing, Angular contact ball bearing, etc.
Based on long-term elaborately research and advanced management concept, We carefully do every point, every drop for the customers to creat "win-win"
Our advantages:
1. Competitive price, high quality
2. OEM service
3. Timely delivery
4. Large stocks
5. ISO 9001: 2008
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.